FAQ for Brake Pad Set Repair
Q: What is necessary when ensuring that the braking surfaces are properly prepared?
A:
Burnish the brake pads and brake rotors.
By BobGM Specialist
01/11/2022 Q: What should be noticed during the installation procedure?
A:
If reusing the lower caliper pin bolt, the threads of the lower caliper pin bolt and the threads of the caliper bracket mounting holes must be free of residue and debris before the application of the thread locker.
By BobGM Specialist
01/11/2022 Q: What should be noticed while replacing the Rear Disc Brake Pads (JE5, JL9)?
A:
Support the brake caliper with heavy mechanic's wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected.
By BobGM Specialist
01/11/2022 Q: What should be removed to get access to the Front Disc Brake Pads?
A:
Remove the tire and wheel assembly.
By BobGM Specialist
01/11/2022 Q: What should be noted when burnishing the Brake Pad and Rotor?
A:
Road test a vehicle under safe conditions and while obeying all traffic laws. Do not attempt any maneuvers that could jeopardize vehicle control.
By BobGM Specialist
01/11/2022 Q: What should be noticed while installing the Front Disc Brake Pads?
A:
If reusing the lower caliper pin bolt, the threads of the lower caliper pin bolt and the threads of the caliper bracket mounting holes must be free of residue and debris before the application of the thread locker.
By BobGM Specialist
01/11/2022 Q: What is the proper way to replace the Rear Disc Brake Pads (J56)?
A:
Inspect the fluid level and remove the tire/wheel assembly, the brake pad retainer, and the brake pads.
By BobGM Specialist
01/11/2022 See more FAQs (2)