FAQ for Alloy Wheels Repair
Q: What should be noted when repairing the tire?
A:
Tire changing can be dangerous and should be done by trained professionals using proper tools and procedures.
By BobGM Specialist
01/11/2022 Q: What kind of tools are recommended for tire mounting and dismounting?
A:
Rim-clamp European-type tire changers are recommended.
By BobGM Specialist
01/11/2022 Q: What is the proper way for tire puncture repair?
A:
The way is to remove the tire, fill the injury (puncture) to keep moisture out, and seal the inner liner with a repair unit to prevent air loss.
By BobGM Specialist
01/11/2022 Q: When should be done when tires are uneven?
A:
Rotate the tire and wheel whenever uneven tire wear is noticed.
By BobGM Specialist
01/11/2022 Q: Under what conditions should we inspect the affected tire?
A:
The LOW/FLAT TIRE indicator reappears, and an EMT has been operated at a pressure significantly below 172 kPa (25 psi).
By BobGM Specialist
01/11/2022 Q: What should be done if the vehicle is equipped with directional tread tires?
A:
Ensure that the directional arrow on the tire is mounted to the outboard side of the rim in the direction of forward rotation when installed onto the vehicle.
By BobGM Specialist
01/11/2022 Q: What should be done when radial tires are in non-drive locations?
A:
It is necessary to regularly rotate the tires and wheels.
By BobGM Specialist
01/11/2022 Q: What should be noticed before evaluating the Aluminum Wheel damage?
A:
If the wheels are chrome-plated, do not re-plate or refinish the wheels. And if the wheels are polished aluminum, do not refinish the wheels in the dealer environment.
By BobGM Specialist
28/10/2022 Q: What should be noticed while servicing the Aluminum Wheel Porosity?
A:
Do not damage the exterior surface of the wheel.
By BobGM Specialist
28/10/2022 Q: What should be noted when refinishing the Aluminum Wheel?
A:
Do not re-machine the wheel. And do not use chemicals to strip the paint from the wheel.
By BobGM Specialist
28/10/2022 See more FAQs (5)