< Back ×
My Vehicle Change Vehicle
2007 Cadillac CTS
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2007 Cadillac CTS Sensor, Inflator Restraint Side Imp
PartNumber: 10373488
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25764307
- Part Description: 2007 Cadillac CTS Sensor, Inflator Restraint Side Imp
Vehicle Fitment- 2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
$104.38 MSRP:$150.01You Save: $45.63 (31%)
OEM (Genuine) 2007 Cadillac CTS Sensor Asm-Inflator Restraint Front End Discriminating
PartNumber: 10373508
Product Specifications- Other Names: Discriminating Sensor, Front Impact Sensor
- Item Dimensions: 3.5 x 3.1 x 3.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25764308
- Part Description: 2007 Cadillac CTS Sensor Asm-Inflator Restraint Front End Discriminating
Vehicle Fitment- 2007 Cadillac CTS | Base, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
$186.85 MSRP:$266.24You Save: $79.39 (30%)
Dorman® OE Solutions Air Bag Impact Sensor for 2007 Cadillac CTS
PartNumber: 590-277Product Specifications- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 10373508
- Package Quantity: 1
- UPC: 885484579866
- Part Description: 2007 Cadillac CTS OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2007 Cadillac CTS | All Trims | All Engines
FAQ for Air Bag Sensor Repair
Q: What is the removal procedure for the Right Inflatable Restraint Roof Rail Module?
A:
Remove the windshield garnish molding, the center pillar garnish moldings, the rear sail panel, the connector position assurance (CPA), the fasteners, and the roof rail module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Inflatable Restraint Steering Wheel Module?
A:
Remove the steering wheel module, the connector position assurance (CPA), the horn contact lead, and the steering wheel module.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Inflatable Restraint Instrument Panel Module?
A:
Install the I/P module, the I/P retainer, the I/P module yellow connector, and the CPA.
By Bob
GM Specialist
01/11/2022Q: What should be suggested to do when you intend to deploy the inflator module?
A:
Notify all the people in the immediate area that you intend to deploy the inflator module because of the loud noise with the rapid expansion of gas involved with deploying an inflator module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Inflatable Restraint Side Impact Module Wiring Harness?
A:
The procedure is to remove the seat back panel, the inflatable restraint side impact module, and the retaining clips.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when disposing of a deployed or undeployed dual-stage module?
A:
The disposal of both deployment loops must be energized to deploy the airbag.
By Bob
GM Specialist
01/11/2022Q: What should be noted when installing the Left Inflatable Restraint Roof Rail Module?
A:
Do not strike or jolt the inflatable restraint side impact sensor (SIS). Before applying power to the SIS make sure that it is securely fastened.
By Bob
GM Specialist
01/11/2022Q: What should be noted when removing the Left Inflatable Restraint Roof Rail Module?
A:
Do not strike the door or the door pillar in the area of the side impact sensor (SIS). turn OFF the ignition and remove the key when performing service in the area of the SIS.
By Bob
GM Specialist
01/11/2022Q: Which tools are required for handling the Inflator Module?
A:
J38826 SIR Deployment Harness, J 39401-B SIR Deployment Fixture, J 38826-25 Roof rail module adapter, J 38826-50 Side impact module adapter, J 38826-75 Steering wheel module adapter (dual stage airbags), J 38826-80 I/P module adapter (dual stage airbags).
By Bob
GM Specialist
01/11/2022Q: What should be noted when dealing with the Repairs and Inspections Required After a Collision?
A:
Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configuration.
By Bob
GM Specialist
01/11/2022See more FAQs (33)