You can remove the coolant crossover pipe, the upper
Intake Manifold, the left valve rocker arm cover, the right valve rocker arm cover, the engine coolant temperature (ECT) electrical connector, the fuel feed line from the fuel rail, the connector position assurance (CPA) retainer, the engine harness electrical connector, the fuel injector harness connector bracket bolt from the intake manifold, the camshaft position (CMP) sensor electrical connector, the fuel injector rail bolts, the fuel rail, the lower intake manifold bolts, the lower intake manifold, the valve rocker arm bolts, the valve rocker arms, the push rods, and the lower intake manifold gaskets and seals, clean the lower intake manifold gasket and seal surfaces on the cylinder heads and the engine block, the gasket and seal surfaces on the lower intake manifold with degreaser, and remove all the loose room temperature vulcanizing sealer (RTV).