2007 Buick Terraza Knock Sensor

You can install the Ignition Coil, the upper right coil mount bolt, the coil mount nuts, the wire retainers to the coil bracket, the upper left coil mount bolt, the right side spark plug wires to the ignition coil, the left side spark plug wires to the ignition coil, the ignition coil electrical connector, the MAP sensor electrical connector, the brake booster vacuum hose to the intake manifold, and the intake manifold cover.

You can insert the Ignition Lock Cylinder, align the lock cylinder retaining tab and the position tab with the slots, push the lock cylinder, install the retaining screws, tilt the lower trim cover up and slide the lower trim cover until the locking tabs snap into the tab slots, install the lower trim cover screws to the steering column, the steering wheel, and the battery negative cable.

It is necessary to record the remaining engine oil life. If the replacement module is not programmed with the remaining engine oil life, the engine oil life will default to 100 percent. If the replacement module is not programmed with the remaining engine oil life, the engine oil will need to be changed at 5 000 km (3,000 mi) from the last engine oil change.