< Back ×
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2007 Buick Terraza Handle, Inside
PartNumber: 89044625
Product Specifications- Location: Driver Side
- Other Names: Handle, Inside
- Item Dimensions: 5.6 x 3.4 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Handle, Inside
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$125.11 MSRP:$188.75You Save: $63.64 (34%)
OEM (Genuine) 2007 Buick Terraza Handle
PartNumber: 15222933
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Handle, Handle, Inside
- Item Dimensions: 6.2 x 4.1 x 4.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Handle
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Buick Terraza Handle Asm, Front Side Door Inside-RH
PartNumber: 89044624
Product Specifications- Location: Passenger Side
- Other Names: Handle, Inside
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Handle Asm, Front Side Door Inside-RH
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Interior Door Handle Repair
Q: How to remove the Sliding Door Inside Handle?
A:
You can Sliding Door Inside Handle, use J42506-A to remove the inside door handle clip, and remove the inside handle from the sliding door.
By Bob
GM Specialist
01/11/2022Q: How to install the Sliding Door Inside Handle?
A:
You can load the clip into the inside door handle with the open end facing up, align the handle with the shaft on the sliding door, press firmly to seat the inside handle to the sliding door, and enable the PSD system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the assist handle retaining bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the service and repair procedure for the Navigation System?
A:
The procedure is to remove the ground cable from the battery's negative terminal, apply the handbrake brake, remove the switch and the floor console, the switch and the floor console, then install the floor console over the handbrake, the switch, the floor console, the ground cable to the battery's negative terminal, clear the diagnostic trouble codes, and set the date and time, see WIS-3. Electrical system-Information display (SID--Technical description.
By Bob
GM Specialist
01/11/2022Q: How to remove the Passenger Assist Handle?
A:
You can remove the body pillar upper trim panel, the assist handle retaining bolts, and the assist handle from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to install the Passenger Assist Handle?
A:
You can install the assist handle to the vehicle, the assist handle retaining bolts and the body pillar upper trim panel.
By Bob
GM Specialist
01/11/2022See more FAQs (1)