Part Description: 2007 Buick Terraza Shield-Exhaust Resonator Heat
More Info
Vehicle Fitment
2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Exhaust Heat Shield Repair
Q: How to remove the Catalytic Converter Heat Shield?
A:
You can remove the catalytic converter, drill out the catalytic converter heat shield rivets, and remove the catalytic converter heat shield.
By Bob
GM Specialist
01/11/2022
Q: How to install the Catalytic Converter Heat Shield?
A:
You can position the catalytic converter heat shield to the underbody, and install new rivets attaching the catalytic converter heat shield to the underbody, and the catalytic converter.
By Bob
GM Specialist
01/11/2022
Q: How to install the Exhaust Muffler Heat Shield?
A:
You can install the muffler heat shield, position the heat shield to the underbody, if equipped with an LWB, install new rivets, position the heat shield to the underbody, and the muffler.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Exhaust Muffler Heat Shield?
A:
You can remove the muffler, drill out the muffler heat shield rivets, drill out the muffler heat shield rivets, and remove the muffler heat shield.
By Bob
GM Specialist
29/10/2022
Q: How to install the Heat Shield?
A:
You can position the heat shield to the underbody, new rivets, and the muffler.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Heat Shield?
A:
You can remove the muffler, drill out the resonator heat shield rivets, and remove the heat shield.
By Bob
GM Specialist
29/10/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to install the Muffler?
A:
You can install the Muffler assembly over the rear axle and towards the rear of the vehicle, the exhaust hanger insulators to the exhaust pipes, a new catalytic converter gasket, the catalytic converter to muffler nuts, and lower the vehicle.
Q: What is the recommended torque for the rear axle fill plug?
A:
The recommended torque is 33 Nm (24 ft. lbs.).
Q: How to remove the exhaust pipe gasket?
A:
You can remove the exhaust manifold to catalytic converter nuts, and the exhaust seal, disconnect any hangers to reposition the exhaust system and remove the exhaust system, and the exhaust manifold pipe gasket.