Notes: Rear, W/O Pwr Sliding; Terraza, Uplander; Right; W/O Power Sliding Door
Location: Passenger Side
Other Names: Latch, Lock
Item Dimensions: 6.2 x 3.2 x 3.1 inches
Item Weight: 0.90 Pounds
Fitment Type: Direct Replacement
Replaces: 16675908, 10321723
Part Description: 2007 Buick Terraza Latch
More Info
Vehicle Fitment
2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Door Latch Assembly Repair
Q: How to install the Rear Side Door Catch?
A:
You can install the sliding door catch with a reinforcement channel, the sliding door catch, open the sliding door, enable the PSD system, and close the sliding door.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Rear Side Door Catch?
A:
You can disable the PSD system, open the sliding door halfway, and remove the bolt, and the sliding door catch with the reinforcement channel.
By Bob
GM Specialist
01/11/2022
Q: How to install the Front Door Latch?
A:
You can install the latch/lock rod to the sliding door latch, the sliding door latch to the sliding door, the sliding door latch screws in sequence, the sliding door water deflector, and the sliding door inner trim panel, and enable the PSD system by installing the PSD 15A fuse into the I/P fuse block.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Front Door Latch?
A:
You can remove the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block, the sliding door inner trim panel, the sliding door water deflector, the sliding door latch screws, the sliding door latch from the sliding door, and the latch/lock rod form the sliding door latch.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Sliding Door Lock Actuator?
A:
You can position the sliding Door Lock Actuator to the sliding door lock and align the mounting holes, secure the rivets that attach the sliding door lock actuator to the actuator bracket, connect the electrical connector to the sliding door lock actuator, and install the sliding door lock.
Q: How to install the door lock cylinder?
A:
You can install the front Door Lock Cylinder to the front door outside handle, the lock cylinder retainer to the front door outside handle, and the front door outside handle.
Q: What is the recommended torque for the sliding door striker screw?