< Back ×
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2007 Buick Terraza Lower Hinge
PartNumber: 10304605
Product Specifications- Location: Driver Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 4.3 x 4.0 x 3.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Lower Hinge
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
$11.52 MSRP:$17.37You Save: $5.85 (34%)
OEM (Genuine) 2007 Buick Terraza Upper Hinge
PartNumber: 15782669
Product Specifications- Location: Driver Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 5.5 x 5.1 x 4.5 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304601
- Part Description: 2007 Buick Terraza Upper Hinge
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Buick Terraza Lower Hinge
PartNumber: 10304604Product Specifications- Location: Passenger Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 5.1 x 4.3 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Terraza Lower Hinge
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Buick Terraza Hinge Asm-Front Side Door Upper
PartNumber: 15782668Product Specifications- Location: Passenger Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 4.3 x 4.1 x 3.2 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304600
- Part Description: 2007 Buick Terraza Hinge Asm-Front Side Door Upper
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
OEM (Genuine) 2007 Buick Terraza Hinge Asm-Lift Gate
PartNumber: 10395371
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 8.5 x 5.1 x 4.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10400564
- Part Description: 2007 Buick Terraza Hinge Asm-Lift Gate
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Door Hinge Repair
Q: How to remove the Rear Side Door Lock Striker?
A:
You can disable the PSD system, open the sliding door, remove the sliding door striker screws, and the sliding door striker and the shim from the C-pillar.
By Bob
GM Specialist
02/11/2022Q: How to install the Rear Side Door Lock Striker?
A:
You can install the sliding door striker and the shim to the C-pillar, the sliding door striker screws, and enable the PSD system by installing the PSD 15A fuse into the I/P fuse block.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the sliding door striker screw?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the Front Door Hinge?
A:
You can install the cone adjuster bolt to the hinge, the new hinge within the previously marked locations, the upper or lower body side hinge bolts to the hinge, the supports from the door, the reference tape from the door, the rocker, and the quarter panel, the front door, and the front door as needed.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolt?
A:
The recommended torque is 33 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Door Hinge?
A:
You can use 2 pieces of masking tape, a utility knife, or other suitable tools to cut the tape at the gap area, clean the hinge mounting surfaces on the door and the body with a rag, mark the hinge locations on the body surfaces with a grease pencil or other suitable marker, remove the upper or lower body side hinge bolts from the hinge, the upper or lower door side hinge bolts from the door, the hinge from the door and body, and the cone adjuster bolt from the hinge.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Door Striker?
A:
You can open the front door, scribe the location of the existing front door lock striker on the B-pillar with a grease pencil, and remove the front door lock striker screws, and the front door lock striker plate.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the screw?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to install the Front Door Striker?
A:
You can install the front door lock striker shim, and the front door lock striker screws, and close the front door.
By Bob
GM Specialist
29/10/2022See more FAQs (4)