Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2007 Buick Terraza Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Buick Terraza | All Trims | 6 Cyl 3.9L
FAQ for Coolant Temperature Sensors Repair
Q: How to install the Coolant Temperature Sensor/Switch (For Computer)?
A:
You can coat the threads of the ECT sensor with sealer GM P/N 13246004 (Canadian P/N 10953480) or equivalent, install the ECT sensor, the ECT electrical connector, the exhaust crossover pipe, the intake manifold cover, if necessary, and fill the cooling system.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Coolant Temperature Sensor/Switch (For Computer)?
A:
You can remove the cooling system, the intake manifold cover, if necessary, the exhaust crossover pipe, the engine coolant temperature (ECT) sensor electrical connector, and the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should I pay attention to about the Radiator Cap?
A:
To avoid being burned, you may not remove the Radiator Cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam under pressure if the radiator cap or surge tank cap is removed while the engine and radiator are still hot.
Q: How to remove the Water Pump?
A:
You can drain the cooling system, loosen the Water Pump pulley bolts, remove the drive belt, the water pump pulley bolts and pulley, the water pump bolts, pump, and gasket, and clean the water pump mating surfaces.
Q: How to remove the Coolant Reservoir?
A:
You can remove the coolant overflow hose clamp at the coolant recovery reservoir, the hose, the coolant recovery reservoir retainer, and the Coolant Reservoir.