Part Description: 2007 Buick Terraza Premium™ Front Lower Rearward Control Arm Bushing
More Info
Vehicle Fitment
2007 Buick Terraza | All Trims | All Engines
FAQ for Control Arm Bushing Repair
Q: How to install the control arm bushing?
A:
You can align the flat edge of the bushing flange to the mark in the control arm, insert the bushing into the control arm, tighten the J 21474-4 until the bushing is fully seated in the control arm, disassemble the bushing installation tools, and install the lower control arm.
By Bob
GM Specialist
01/11/2022
Q: How to remove the control arm bushing?
A:
You can remove the lower control arm, the lower control arm in a vice, the lower control arm along the flat edge of the bushing flange, tighten the J 21474-4 until the bushing is removed from the control arm, and disassemble the bushing removal tools.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Automatic Level Control Sensor?
A:
You can install the ALC sensor to the vehicle, the height sensor bracket bolts, the ALC sensor link onto the sensor arm ball stud, the ALC height sensor electrical connector, and lower the vehicle.
Q: How to install the Stabilizer Bushing?
A:
You can install the left and right side stabilizer shaft insulators, the left and right side stabilizer shaft insulator brackets, and the left and right side stabilizer shaft insulator bracket bolts, and lower the vehicle.