2007 Buick Terraza Brake Pad Set

You can install the two brake pad retainers, the brake pads, the brake caliper guide pin, and the lower caliper guide pin, remove the 2 wheel nuts securing the rotor to the hub and bearing, install the tire and wheel, fill the master cylinder to the proper level with new clean brake fluid, and burnish the pads and the rotors.

You can inspect the fluid level in the brake master cylinder reservoir, remove the tire and wheel, install two wheel nuts to secure the rotor, a C-clamp, remove the lower brake caliper guide point, the brake caliper, the brake pads, the brake pad retainers, install a C-clamp over the brake caliper and against the block of wood or the old brake pad, tighten the C-clamp until the brake caliper piston pushes completely into the brake caliper bore, remove the C-clamp from the brake caliper, and inspect the brake caliper guide pins for corrosion or damage.

The recommended torque is 54 N.m (40 lb-ft).

You can remove the tire and wheel, the brake rotor, the axle nut dust cover, the cotter pin, the wheel drive shaft retaining nut, the wheel hub and bearing retaining bolts, the wheel drive shaft from the wheel hub and bearing using J 45859, and the wheel hub and bearing.

You can install the wheel hub and bearing, the wheel hub and bearing retaining bolts, the wheel drive shaft retaining nut, the retainer, the dust cap, the brake rotor, and the tire and wheel.