< Back ×
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2007 Buick Terraza
PartNumber: 130.66054Product Specifications- UPC: 805890244141
- Part Description: 2007 Buick Terraza Premium Brake Master Cylinder
Vehicle Fitment- 2007 Buick Terraza | All Trims | All Engines
$70.50
OEM (Genuine) 2007 Buick Terraza Cylinder Asm, Brake Master
PartNumber: 19209193
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.3 x 7.5 x 9.4 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15189238
- Part Description: 2007 Buick Terraza Cylinder Asm, Brake Master
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2007 Buick Terraza
PartNumber: 10-3247Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: M12 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617768672
- Part Description: 2007 Buick Terraza Remanufactured Master Cylinder
Vehicle Fitment- 2007 Buick Terraza | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: How to remove the Brake Master Cylinder?
A:
You can remove the brake master cylinder from the vehicle, clamp the flange on the master cylinder body in a vise, drive out the master cylinder reservoir pins, remove the master cylinder reservoir, the master cylinder reservoir grommets, inspect the reservoir for cracks or deformation, use clean denatured alcohol to clean the reservoir, and non-lubricated compressed air to dry the reservoir.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screw?
A:
The recommended torque is 1.6 N.m (14 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the air door actuator/motor?
A:
You can install the mode actuator as an assembly with the actuator cam, the mode actuator mounting screws to the HVAC module, the electrical connection at the mode actuator, the center console duct, the screws to the center console duct, the center console, and the floor air outlet duct extension.
By Bob
GM Specialist
01/11/2022Q: How to remove the air door actuator/motor?
A:
You can remove the floor air outlet duct extension from the floor duct, the center console, the screws from the center console duct, the center console duct, the electrical connection from the mode actuator, the mode actuator mounting screws from the HVAC module, and the mode actuator as an assembly with the actuator cam.
By Bob
GM Specialist
01/11/2022Q: What should I pay attention to about the Brake Master Cylinder?
A:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container. The use of any type of fluid other than the recommended type of brake fluid may cause contamination which could result in damage to the internal rubber seals and/or rubber linings of hydraulic brake system components.
By Bob
GM Specialist
01/11/2022Q: How to install the Brake Master Cylinder?
A:
You can use clean brake fluid to lubricate the new grommets, insert the grommets into the grooves in the reservoir, connect the reservoir, drive in the master cylinder reservoir pins, and install the master cylinder.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fittings?
A:
The recommended torque is 32 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (2)