2007 Buick Terraza Brake Booster

You can relieve fuel line pressure, drain the cooling system, remove the coolant recovery reservoir, the left front cross brace, the engine control module (ECM) cover from the air cleaner housing, the ECM and set aside, the air cleaner assembly, the fuel lines, the heater hose, the fuel lines, the fluid level sensor switch, the brake lines, the master cylinder, the brake pressure modulator valve (BPMV) assembly and bracket, the brake booster vacuum hose, the knee bolster, the booster push pin retaining clip and washer, the brake booster push rod, the brake booster mounting nuts, the engine forward to gain access, and the brake booster.

You can position the brake booster, the brake booster mounting nuts, the master cylinder, the brake booster push rod, the washer and the brake booster pushrod retaining clip, the brake pedal position sensor, the knee bolster, the engine back, and install the engine mounts, bolts, and nuts, the brake booster vacuum hose, the BPMV and bracket assembly, and the brake master cylinder and connect the brake lines, the fluid level sensor switch, the fuel pipes, the heater hose, the air cleaner assembly, the ECM, the ECM cover, the left front cross brace, the coolant recovery reservoir, bleed the cooling system, and the hydraulic brake system.