Part Description: 2007 Buick Terraza Tray Asm-Battery
More Info
Vehicle Fitment
2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Battery Trays Repair
Q: How to remove the battery tray?
A:
You can remove the battery, the battery tray bolts, and the battery tray.
By Bob
GM Specialist
28/10/2022
Q: What is the recommended torque for the bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
28/10/2022
Q: How to install the battery tray?
A:
You can install the battery tray, the battery tray bolts, and the battery.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: How to install the Starter Motor?
A:
You can position the Starter motor, install the starter motor bolts, the engine harness, the starter motor °S° terminal nut, the engine harness, the starter motor °BAT° terminal nut, the engine harness electrical connector, the engine harness ground, the engine harness ground nut, the transaxle converter cover, the transaxle converter cover bolt, the engine to transmission brace, the radiator air baffle, and the negative battery cable.
Q: How to remove the Battery Negative Cable?
A:
You can remove the negative battery cable, the instrument panel (I/P) wiring harness electrical connector, the positive battery cable nut, the positive battery cable from the battery, the negative battery cable ground terminal nut, the negative battery cable ground, the junction block cover, the positive battery cable to junction block nut, the I/P wiring harness, the radiator air baffle, the starter motor °BAT° terminal nut, the positive battery cable from the starter motor °BAT° terminal, the engine harness ground nut, the engine harness ground terminal, the negative battery cable from the transaxle stud, the battery cable conduit retainers from the inner fender, the negative and positive Battery Cables from the vehicle, the negative and positive battery cables, and the battery current sensor.
Q: How to install the alternator?
A:
You can install the generator, the generator lower bolt and stud until snug, the generator upper bolt, the idler pulley and bolt on the right front side of the engine, the wire harness to the retainers on the upper and lower right front shock tower, the nut holding the power steering lines on the back of the generator, the engine harness electrical connector, the engine harness ground, the engine harness ground nut, the engine into the normal location, the washer solvent container, and the negative battery cable.