< Back ×
My Vehicle Change Vehicle
2007 Buick Terraza
< Back to View All
Engine Sensors, Switches & Relays
- Department
- Prices
OEM (Genuine) 2007 Buick Terraza Pedal Travel Sensor
PartNumber: 25919184
Product Specifications- Notes: Terraza, Uplander
- Other Names: Pedal Travel Sensor
- Item Dimensions: 7.2 x 4.2 x 17.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25808024, 15240037
- Part Description: 2007 Buick Terraza Pedal Travel Sensor
Vehicle Fitment- 2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Accelerator Pedal Position Sensor Repair
Q: How to install the Acceleration/Deceleration Sensor?
A:
You can install the yaw rate sensor, the nuts, the electrical connector, and the front floor console bracket assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nut?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Pedal Positioning Sensor?
A:
You can install adhesive GM P/N 12345493 (Canadian P/N 10953488) to the screw, the sensor fork to the pin, the sensor to align the sensor locator to the hole in the extension bracket, the brake pedal position sensor screw, the electrical connector, the sensor, and install the I/P insulator.
By Bob
GM Specialist
01/11/2022Q: How to install the Accelerator Pedal Position Sensor?
A:
You can install the accelerator pedal, the accelerator pedal bolts, the I/P harness electrical connector, the CPA retainer, the insulator panel, and the operation of the accelerator pedal.
By Bob
GM Specialist
01/11/2022Q: How to remove the Pedal Positioning Sensor?
A:
You can remove the instrument panel (I/P) insulator, the electrical connector, the screw, and the brake pedal position sensor.
By Bob
GM Specialist
01/11/2022Q: How to remove the Accelerator Pedal Position Sensor?
A:
You can remove the insulator panel, the connector position assurance (CPA) retainer, the instrument panel (I/P) harness electrical connector, the accelerator pedal bolts, and the accelerator pedal.
By Bob
GM Specialist
01/11/2022Q: How to remove the Acceleration/Deceleration Sensor?
A:
You can remove the front floor console bracket assembly, the electrical connector, the nuts, and the yaw rate sensor.
By Bob
GM Specialist
01/11/2022See more FAQs (2)