< Back ×
My Vehicle Change Vehicle
2007 Buick Rendezvous
< Back to View All
Transmissions Components & Shifters
- Department
- Location
- Material
- Brands
- Prices
OEM (Genuine) 2007 Buick Rendezvous Transmission Mount
PartNumber: 22146688
Product Specifications- Notes: Rendezvous; 3.5 Liter
- Other Names: Transmission Mount
- Item Dimensions: 5.5 x 5.6 x 2.0 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rendezvous Transmission Mount
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$54.63 MSRP:$90.45You Save: $35.82 (40%)
Anchor® Transmission Mount for 2007 Buick Rendezvous
PartNumber: 2818Product Specifications- Notes: SOLID RUBBER; AT;
- Bracket Included: YES
- Bracket Material: Steel
- Bushing Material: Rubber
- Color: Black
- Hardware Included: NO
- Installation Instructions Included: NO
- Installation Tools Included: NO
- Material: Steel and Rubber
- OE Part Number: 22146688
- Quantity: 1
- Type: OE Equivalent
- UPC: 081106028181
- Part Description: 2007 Buick Rendezvous Transmission Mount
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$9.33
Westar® Automatic Transmission Mount for 2007 Buick Rendezvous
PartNumber: EM-2818GProduct Specifications- Notes: Gold Line
- UPC: 656591328186
- Part Description: 2007 Buick Rendezvous Automatic Transmission Mount
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$16.21
OEM (Genuine) 2007 Buick Rendezvous Bracket-Engine Mount Strut & Engine Lift
PartNumber: 12594433
Product Specifications- Notes: 3.5 Liter
- Location: Driver Side
- Item Dimensions: 4.4 x 4.4 x 15.3 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10154776, 12570320
- Part Description: 2007 Buick Rendezvous Bracket-Engine Mount Strut & Engine Lift
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
$30.46 MSRP:$61.44You Save: $30.98 (51%)
Westar® Automatic Transmission Mount for 2007 Buick Rendezvous
PartNumber: EM-2818Product Specifications- Notes: Available in the Westar Gold Line
- UPC: 656591028185
- Part Description: 2007 Buick Rendezvous Automatic Transmission Mount
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$11.12
OEM (Genuine) 2007 Buick Rendezvous Bracket-Trans Mount Trans Side *Black
PartNumber: 10274687
Product Specifications- Notes: 3.5 Liter
- Item Dimensions: 8.7 x 6.8 x 2.7 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10217002
- Part Description: 2007 Buick Rendezvous Bracket-Trans Mount Trans Side *Black
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$16.01 MSRP:$32.27You Save: $16.26 (51%)
GSP North America® Driver Side Transmission Mount for 2007 Buick Rendezvous
PartNumber: 3518276Product Specifications- Bushing Color: Black
- Bushing Material: Rubber
- Housing Color: Silver
- Mount material: Steel/Rubber
- Mounting Hardware Included: No
- Prop 65 - Short Label: Warning: Cancer and Reproductive Harm - www.p65warnings.ca.gov
- Prop 65 Yes/No: Yes
- UPC: 883331001348
- Part Description: 2007 Buick Rendezvous Driver Side Transmission Mount
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
OEM (Genuine) 2007 Buick Rendezvous Bracket-Engine Mount *Black
PartNumber: 10216970
Product Specifications- Notes: 3.5 Liter, 2WD
- Item Dimensions: 9.3 x 3.7 x 1.8 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rendezvous Bracket-Engine Mount *Black
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
FAQ for Transmission Mount Repair
Q: How to install the transmission mount bracket?
A:
After installing the transmission upper brace, you can install the transmission upper brace bolts and tighten the transmission upper brace outboard bolts to 23 N.m. Then you can tighten the transmission upper brace inboard bolt to 50 N.m. After lowering the vehicle, you can install the two frame rear bolts and connect the intermediate steering shaft to the steering gear. Then you can install the transmission upper brace nut and tighten the transmission upper brace nut to 50 N.m. After installing the transmission lower brace, you can install the transmission lower brace bolts and tighten the transmission lower brace bolts to 50 N.m. After that, you can install the right engine splash shield and the right front tire and wheel. Then you can lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the automatic transmission brace?
A:
After raising and supporting the vehicle, you can remove the right front tire and wheel, the right engine splash shield, the transmission lower brace bolts, and the transmission lower brace. Then you can separate the transmission from the engine. After that, you need to remove the transmission upper brace bolts and the transmission upper brace.
By Bob
GM Specialist
01/11/2022Q: How to remove the transmission mount?
A:
You need to remove the transaxle mount bracket, the transaxle mount lower nuts and the transaxle mount.
By Bob
GM Specialist
01/11/2022Q: How to install the transmission mount?
A:
You need to install the transaxle mount, the transaxle mount lower nuts and the transaxle mount bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the automatic transmission mount bracket?
A:
After raising and supporting the vehicle, you need to remove the left front tire, the wheel, and the left engine splash shield. After supporting the transaxle, you can remove the transaxle mount upper nuts, the transaxle mount bracket bolts, and the transaxle mount bracket.
By Bob
GM Specialist
01/11/2022Q: How to install the automatic transmission mount bracket?
A:
After positioning the transaxle mount bracket, you can install the transaxle mount bracket bolts. You need to start with the forward lower bolt and work clockwise to tighten the transaxle mount bracket bolts to 95 N.m. After removing the utility stand, you can install the transaxle mount upper nuts and tighten the transaxle mount upper nuts to 47 N.m. Next, you can install the left engine splash shield and the left front tire and wheel. Then you can lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the transmission mount bracket?
A:
After raising and supporting the vehicle, you need to remove the right front tire, the wheel, the right engine splash shield, the transmission lower brace bolts, the transmission lower brace, and the transmission upper brace nut located behind the power steering pump. Then you can disconnect the intermediate steering shaft, raise and support the vehicle, support the center of the rear frame, remove the two frame rear bolts, and raise the vehicle. Then you can remove the transmission upper brace bolts and the transmission upper brace.
By Bob
GM Specialist
01/11/2022Q: How to install the automatic transmission brace?
A:
You can install the transmission upper brace. Then you need to install the transmission upper brace bolts, tighten the transmission upper brace outboard bolts to 23 N.m., and tighten the transmission upper brace inboard bolt to 50 N.m. After that, you need to install the transmission to the engine, the transmission lower brace, and the transmission lower brace bolts. After that, you can tighten the transmission lower brace bolts to 50 N.m. You can install the right engine splash shield and the right front tire and wheel. Then you need to lower the vehicle.
By Bob
GM Specialist
01/11/2022See more FAQs (3)