Contact Us Live Chat or 1-888-220-8330
Search Bar
Search by Part Number or Keywords
  • My Garage
  • My Account
  • Cart
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Help Center
< Back ×
  • Body & Mirrors
  • Chassis & Brakes
  • Engine & Drivetrain
  • Electrical & Lighting
Login/Register My Account Track Order Help Center Contact Us
My Vehicle Change Vehicle
2007 Buick Rendezvous
Change Vehicle
Vehicle Options
We need more information about your vehicle to make a correct determination of fitment
< Back to View All

    0 Product found

    4 Q&A for Repair
    Show Item:
    • 30
    • 60
    • 90
    Sort by:
    Recommended
    Filter
    Sort
    View by

    FAQ for Repair

    Q: How to remove the throttle body?
    A:
    After removing the air cleaner outlet duct and disconnecting the engine harness electrical connector, you can remove the thermostat bypass pipe, the throttle body bolts, the throttle body, and the throttle body gasket. Then you can clean and inspect the throttle body gasket mating surfaces.
    By Bob
    GM Specialist
    02/11/2022
    Q: What do we need to do before inserting fingers into the throttle bore?
    A:
    We need to turn off the ignition before inserting fingers into the throttle bore.
    By Bob
    GM Specialist
    02/11/2022
    Q: How to install the throttle body?
    A:
    After installing a new throttle body gasket and the throttle body, you can install the throttle body bolts and the thermostat bypass pipe. Then you can connect the engine harness electrical connector and install the air cleaner outlet duct.
    By Bob
    GM Specialist
    02/11/2022
    Q: How to clean the throttle body?
    A:
    After removing the air cleaner outlet duct, you need to inspect the throttle body bore and the throttle valve plate for deposits. Then you can clean the throttle body bore and the throttle valve plate. After that, you can install the air cleaner outlet duct.
    By Bob
    GM Specialist
    02/11/2022

    FAQ for Other Repair Info

    Q: How to remove the manifold absolute pressure sensor?
    A:
    After removing the intake manifold cover, you can disconnect the fuel injector harness electrical connector. Then you can remove the MAP Sensor bolt/stud and bracket, the MAP sensor, and the MAP sensor port seal.
    Q: How to remove the mass airflow sensor?
    A:
    You can remove the air cleaner outlet duct, disconnect the Mass Air Flow Sensor electrical connector, and remove the MAF sensor screws and the MAF sensor and O-ring seal.
    Q: How to remove the upper intake manifold?
    A:
    After draining the cooling system, you need to remove the Intake Manifold cover and the air cleaner outlet duct, disconnect the evaporative emission (EVAP) canister purge solenoid valve quick connect fitting, remove the positive crankcase ventilation (PCV) fresh air tube, and reposition the brake booster vacuum hose clamp. Then you need to remove the brake booster vacuum hose, disconnect the electronic control module electrical connector and t the manifold absolute pressure (MAP) sensor electrical connector, remove the engine harness clip, disconnect the exhaust gas recirculation (EGR) valve electrical connector, and remove the engine harness clips. After that, you can disconnect the spark plug wires from the ignition coil and remove the spark plug wire harness clips. Then you can remove the PCV foul air tube bolt, the PCV foul air tube clip, the PCV foul air tube, the ignition coil, the EGR valve, and the generator bracket. Then you can remove and inspect the throttle body seal.