< Back ×
My Vehicle Change Vehicle
2007 Buick Rendezvous
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2007 Buick Rendezvous Latch Asm-Hood Primary & Secondary
PartNumber: 10422216
Product Specifications- Other Names: Lock
- Item Dimensions: 7.0 x 6.8 x 6.5 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rendezvous Latch Asm-Hood Primary & Secondary
Vehicle Fitment- 2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$75.40 MSRP:$108.37You Save: $32.97 (31%)
FAQ for Hood Latch Repair
Q: How to install the hood latch support?
A:
After installing the hood latch support bracket and the 4 bolts, you can reposition the hood latch release cable, install the hood latch, and connect the electrical harness. Then you can close the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the seal?
A:
After aligning the hood rear weatherstrip, you need to install the push-in retainers to the hood rear weatherstrip. Then you can close the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood rear side seal?
A:
You need to open the hood, pull the rear side hood seal and remove the rear side hood seal. Then you can clean the adhesive from the pinch-weld flange and motor compartment flange surface.
By Bob
GM Specialist
01/11/2022Q: How to remove the seal?
A:
After opening the hood, you can remove the push-in retainers and the hood rear weatherstrip. Then you can remove the hood rear weatherstrip.
By Bob
GM Specialist
01/11/2022Q: How to install the hood latch?
A:
After installing the hood latch release cable and aligning the hood latch, you can install the nuts and adjust the hood. Then you can close the hood.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood latch support?
A:
After opening the hood, you can remove the electrical harness, the hood latch, and the 4 bolts. Then you can reposition the hood latch release cable and remove the hood latch support bracket.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood latch?
A:
After opening the hood, you need to mark the hood latch and remove the nuts. Then you can disconnect the hood latch release cable and remove the hood latch.
By Bob
GM Specialist
01/11/2022Q: How to remove the hood hinge?
A:
After removing the hood, the hood rear side seal, and the hood assist rod, you can remove the hood hinge to the fender bolts and the hood hinge from the fender.
By Bob
GM Specialist
01/11/2022Q: How to install the hood hinge?
A:
After positioning the hood hinge to the fender, you can install the hood hinge, the hood, the hood assist rod, and the hood rear side seal. Then you can adjust the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the hood rear side seal?
A:
You need to remove the protective backing paper from the adhesive on the rear side hood seal. After that, you can install the rear side hood seal, press the side rear hood seal, and close the hood.
By Bob
GM Specialist
01/11/2022See more FAQs (5)