< Back ×
My Vehicle Change Vehicle
2007 Buick Rendezvous
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
Dorman® Hvac Heater Hose Assembly for 2007 Buick Rendezvous
PartNumber: 626-552Product Specifications- Notes: Thermostat Bypass Pipe; wo/Oil Cooler
- Color: Black
- Construction: Rubber
- Hardware: Use Existing Hardware
- OE Part Number: 12594453
- UPC: 885484579026
- Part Description: 2007 Buick Rendezvous Hvac Heater Hose Assembly
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$33.81
Gates® Safety Stripe Hvac Heater Hose for 2007 Buick Rendezvous
PartNumber: 28409Product Specifications- Notes: Cut to Length, 41"
- Centerline Length: 50 ft
- End 1 Inside Diameter: 10 mm
- End 2 Inside Diameter: .375 in
- Material: EPDM
- OE Part Number: 8899
- UPC: 072053081183
- Weight Per Length: 8.25 lbs./Carton
- Working Pressure: 60 PSI
- Part Description: 2007 Buick Rendezvous Safety Stripe Hvac Heater Hose
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$44.06
Gates® Engine Coolant Molded Bypass Hose for 2007 Buick Rendezvous
PartNumber: 19026Product Specifications- Branch Quantity: 0
- Centerline Length (in): 6
- Centerline Length (mm): 152
- End 1 Inside Diameter: 0.59 in
- End 2 Inside Diameter: 0.59 in
- Material: EPDM
- Molded: Yes
- Number of Quick Connect Fittings: 0
- OE Part Number: 2465
- UPC: 072053199383
- Part Description: 2007 Buick Rendezvous Engine Coolant Molded Bypass Hose
Vehicle Fitment- 2007 Buick Rendezvous | All Trims | 6 Cyl 3.5L
$4.95
FAQ for Heater Hose Repair
Q: How to remove the heater hose?
A:
After draining the cooling system, you need to remove the wiper motor module assembly. Then you need to disconnect the vacuum hose. After that, you can remove the air cleaner outlet duct, the transmission fluid filler tube, the outlet heater hose, the outlet heater hose clamp, the outlet heater hose, and the outlet heater hose.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater inlet hose?
A:
After draining the cooling system, you can remove the wiper motor module assembly and disconnect the vacuum hose. Then you can remove the air cleaner outlet duct and the transmission fluid filler tube, disconnect the inlet heater hose, the heater hose clamp, the inlet heater hose, and the inlet heater hose.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater pipes?
A:
After removing and repositioning the coolant reservoir, you can drain the cooling system, remove the air cleaner intake duct and disconnect the heater hoses. Then you can remove the heater pipe bolts, the heater pipe assembly, and the O-ring seal and gasket. After that, you can clean the gasket sealing surfaces.
By Bob
GM Specialist
01/11/2022Q: How to install the heater hose?
A:
After installing the outlet heater hose, you need to connect the outlet heater hose, the heater hose clamp, and the outlet heater hose. Then you need to install the transmission fluid filler tube and the air cleaner outlet duct. After connecting the vacuum hose to the brake booster, you can install the wiper motor module assembly and fill the cooling system.
By Bob
GM Specialist
01/11/2022Q: How to remove the heater pipe?
A:
After draining the cooling system, you can remove the air cleaner outlet duct and the thermostat bypass pipe. After disconnecting the inlet heater hose from the inlet pipe, you can remove the heater inlet pipe nut, the inlet pipe, and the O-ring seal.
By Bob
GM Specialist
01/11/2022Q: How to install the heater pipes?
A:
After installing a new O-ring seal, the gasket, the heater pipe assembly, and the heater inlet pipe bolts, you can connect the heater hoses, install the air cleaner intake duct, fill the cooling system, and install the coolant reservoir.
By Bob
GM Specialist
01/11/2022Q: How to install the heater pipe?
A:
You need to install a new O-ring seal, the inlet pipe, and the heater inlet pipe nut. You need to tighten the nut to 25 N.m. After connecting the inlet heater hose to the inlet heater pipe, you can install the thermostat bypass pipe and the air cleaner outlet duct. Then you can fill the coolant.
By Bob
GM Specialist
01/11/2022Q: How to install the heater inlet hose?
A:
After installing the inlet heater hose, you can connect the inlet heater hose, the heater hose clamp, and the inlet heater hose. Then you can install the transmission fluid filler tube and the air cleaner outlet duct. After connecting the vacuum hose, you can install the wiper motor module assembly and fill the cooling system.
By Bob
GM Specialist
01/11/2022See more FAQs (3)