Part Description: 2007 Buick Rendezvous Handle Asm-Rear Side Door Outside
More Info
Vehicle Fitment
2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
FAQ for Exterior Door Handle Repair
Q: How to install the door handle?
A:
After installing the door handles and the new rivets, you need to connect the outside door handle rod-to-lock and install the water deflector and the door trim panel. Then you can remove the tape.
By Bob
GM Specialist
01/11/2022
Q: How to remove the door handle?
A:
You need to place tape around the handle. Then you need to remove the front door trim panel and the water deflector, disconnect the outside door handle rod-to-lock, and remove the center of the rivets. After that, you can drill out the rivet and remove the door handles.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the front side door hinge?
A:
After positioning the front Door Hinge, you need to install the bolts and remove the support from the front door. Then you need to inspect the door for proper operation and alignment.
Q: How to install the door lock cylinder?
A:
After installing the lock cylinder rod, the front Door Lock Cylinder, and the lock cylinder retainer, you can connect the front door lock cylinder rod. Then you can install the front door water deflector and the front door panel.
Q: How to install the power door lock switch?
A:
After installing the Door Lock Switch and connecting the electrical connector, you can install the door trim panel and test the lock switch for proper operation.