Part Description: 2007 Buick Rendezvous Shift Control Cable
More Info
Vehicle Fitment
2007 Buick Rendezvous | CX, CXL, CXL Plus, Ultra | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
$78.42MSRP: $129.80
You Save: $51.38 (40%)
FAQ for Automatic Transmission Shifter Cable Repair
Q: How to remove the automatic transmission range selector lever cable bracket?
A:
You need to install the automatic transaxle range selector cable bracket. Then you can install the automatic transaxle range selector cable bracket bolts and tighten the automatic transaxle range selector cable bracket bolts to 25 N.m. After installing the automatic transaxle range selector cable, you can adjust the automatic transaxle range selector cable and install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022
Q: How to remove the automatic transmission range selector lever cable?
A:
You need to remove the air cleaner assembly and the retaining clip. After raising the vehicle, you can remove the automatic transaxle range selector cable. Then you need to remove the automatic transaxle range selector cable, lower the vehicle, and remove the knee bolster and the retaining clip. After that, you can remove the automatic transaxle range selector cable and the automatic transaxle range selector cable.
By Bob
GM Specialist
01/11/2022
Q: How to install the automatic transmission range selector lever cable?
A:
After routing the automatic transaxle range selector cable, you can install the automatic transaxle range selector cable, the automatic transaxle range selector cable, the retaining clip, the automatic transaxle range selector cable, the knee bolster, and the selector cable. After raising the vehicle, you can install the range selector cable, lower the vehicle, install the retaining clip, adjust the automatic transaxle range selector cable, and install the air cleaner assembly.
By Bob
GM Specialist
01/11/2022
Q: How to adjust the range selector lever cable?
A:
After setting the parking brake and blocking the wheels, you need to lift the adjuster lock button, rotate the automatic transaxle range selector lever, grasp the automatic transaxle range selector cable terminal, and push down the pin. Then you need to press the adjuster lock button d, release the parking brake, and start the engine.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the transmission control module?
A:
After turning the ignition OFF, you can remove the air cleaner upper cover and the Transmission Control Module (TCM). Then you can disconnect the TCM electrical connectors.
Q: How to remove the automatic transmission fluid filter and seal?
A:
After removing the oil pan and the gasket, you can remove the filter and the lip ring seal. Then you can clean the screen and allow the screen to dry completely.
Q: How to remove the oil pan?
A:
After raising and supporting the vehicle, you can place a drain pan, remove the oil pan bolts, and loosen the rear oil pan bolts. Then you can pry the oil pan loose, remove the oil pan and the oil pan gasket, install a new bolt and washer assembly, and clean the oil pan, the gasket, and the magnet. Then you can clean the oil pan gasket surfaces.