Part Description: 2007 Buick Rainier Stoplamp Bulb
More Info
Vehicle Fitment
2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$4.05MSRP: $7.62
You Save: $3.57 (47%)
FAQ for Tail Light Bulbs Repair
Q: How to remove the Tail Light Bulb?
A:
You should remove the tail lamp assembly and the tail lamp circuit board, place the tail lamp assembly onto a clean prepared surface and pull the bulb straight out to remove the tail lamp bulb from the socket assembly.
By Bob
GM Specialist
01/11/2022
Q: How to install the Tail Light Bulb?
A:
You should install the tail lamp bulb to the tail lamp circuit board, ensure the bulbs are wiped clean and free of any oil or dirt, install the tail lamp to the vehicle, and check the bulbs for proper operation.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Park/Turn Signal/Side Marker Lamp Bulb (Rainier)?
A:
You should install the turn signal/park bulb to the socket, the bulb and socket to the headlamp by rotating the bulb and socket clockwise, and the headlamp.
Q: How to remove the Front Fog Lamp Bulb?
A:
You should turn the fog lamp switch to the OFF position, rotate the bulb socket counterclockwise to release the socket from the fog lamp housing, remove the socket from the fog lamp housing, and the bulb from the socket.
Q: How to remove the Headlamp Housing Panel?
A:
You should remove the headlamp assemblies, the grille, the bolts that retain the headlamp housing panel to the core support, and the headlamp housing panel from the vehicle.