< Back ×
My Vehicle Change Vehicle
2007 Buick Rainier
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2007 Buick Rainier Passenger Discriminating Sensor
PartNumber: 19168633
Product Specifications- Location: Passenger Side
- Other Names: Passenger Discriminating Sensor, Seat Cushion Pad
- Item Dimensions: 9.7 x 25.2 x 25.5 inches
- Item Weight: 6.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Passenger Discriminating Sensor
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$372.93 MSRP:$531.36You Save: $158.43 (30%)
OEM (Genuine) 2007 Buick Rainier Seat Cushion Pad
PartNumber: 89043458
Product Specifications- Location: Passenger Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Seat Cushion Pad
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$82.26 MSRP:$124.09You Save: $41.83 (34%)OEM (Genuine) 2007 Buick Rainier Seat Cushion Pad
PartNumber: 89043622
Product Specifications- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 24.7 x 22.6 x 8.2 inches
- Item Weight: 20.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Seat Cushion Pad
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier Seat Cushion Pad
PartNumber: 89043444
Product Specifications- Location: Driver Side
- Other Names: Seat Cushion Pad
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Seat Cushion Pad
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Seat Cushion Pad Repair
Q: How to remove the Front Seat Back Panel?
A:
You should remove the front bucket seat assembly from the vehicle, the front seat back cover and pad, the lumbar cables from the panel clips, the 2 push-pin fasteners from each side of the panel, the push-pin fastener from the bottom of the panel, the panel from the top of the seat-back frame, and the seat-back frame.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Seat Cushion (TrailBlazer, Envoy, Rainier)?
A:
You should remove the rear seat bracket trim cover, the hydraulic jack from the jack stowage area, the 2 mounting nuts, and the seat cushion assembly from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the side impact module screws?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Cushion Bracket?
A:
You should install the 2 bolts securing the bracket assembly to the seat cushion, and the rear seat cushion assembly in the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Seat Back?
A:
You should remove the front bucket seat assembly from the vehicle, the seat cushion trim panel, the seat belt anchor nut, the push-pins securing the seat cover to the seat frame, the seat back pivot bolt, the 2 bolts from the seat back recliner arm, and the seat back assembly from the seat adjuster.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Seat Cushion Trim Panel (TrailBlazer EXT, Envoy XL)?
A:
You should remove the seat from the vehicle, the rear seat bracket trim covers, the rear seat bracket mounting nuts, the rear seat bracket, the 2 bolts securing the support to the seat cushion trim panel, the seat cover J-strips from the seat cushion trim panel, the screws securing the seat cushion trim panel to the seat frame, and the seat cushion trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Cushion Frame?
A:
You should install the seat cushion cover and pad to the seat frame, the 4 nuts that secure the seat pan to the power seat adjuster frame, the seat harness to the seat pan, the SIR harness to the seat clips, and the 3 seat switch bezel mounting screws.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Back Frame?
A:
You should install the wiring harness clips to the seat back frame, the lumbar wiring harness to the seat back frame, the SIR wiring harness to the seat back frame, the side impact module tub to the seat back frame with 2 push pins, the inflatable side impact module to the seat back frame with 2 screws, the seat belt and retractor assembly, the lumbar assembly, the front seat back panel, the seat back cover and pad, the front seat back, the seat trim panel and the seat assembly to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Driver Seat Recliner Handle and Passenger Seat Recliner Handle?
A:
You should remove the screw securing the recliner handle and the recliner handle.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Cushion (TrailBlazer, Envoy, Rainier)?
A:
You should install the 2 nuts that retain the seat cushion assembly to the floor panel, the hydraulic jack into the jack stowage area, and the rear mount trim cover.
By Bob
GM Specialist
01/11/2022See more FAQs (46)