< Back ×
My Vehicle Change Vehicle
2007 Buick Rainier
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2007 Buick Rainier Molding Asm-Windshield Side Garnish *Light Opel Gray
PartNumber: 15782066
Product Specifications- Notes: 2005-07, Gray
- Location: Passenger Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 30.3 x 8.5 x 8.5 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Molding Asm-Windshield Side Garnish *Light Opel Gray
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$26.09 MSRP:$37.51You Save: $11.42 (31%)OEM (Genuine) 2007 Buick Rainier Molding, Windshield Side Garnish
PartNumber: 15782063
Product Specifications- Notes: 2005-07, Gray
- Location: Driver Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 32.6 x 5.9 x 3.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Molding, Windshield Side Garnish
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier Molding Asm-Windshield Side Garnish *Cashmere E
PartNumber: 15782064
Product Specifications- Notes: 2005-07, Cashmere
- Location: Driver Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 30.5 x 4.6 x 3.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Molding Asm-Windshield Side Garnish *Cashmere E
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier MOLDING, Roof Trim(Interior)
PartNumber: 15782067Product Specifications- Notes: 2005-07, Cashmere
- Location: Passenger Side
- Other Names: Weatherstrip Pillar Trim
- Item Dimensions: 30.5 x 4.7 x 3.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier MOLDING, Roof Trim(Interior)
Vehicle Fitment- 2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Pillar Panels Repair
Q: How to remove the Liftgate Garnish Molding?
A:
You should use a flat-bladed tool to carefully release the garnish molding retainers and remove the garnish molding from the liftgate.
By Bob
GM Specialist
02/11/2022Q: How to install the Body Side Rear Window Garnish Molding (TrailBlazer EXT, Envoy XL)?
A:
You should install the garnish molding to the vehicle, the seat belt retractor to the body, and the bolt that retains the seat belt anchor to the body.
By Bob
GM Specialist
02/11/2022Q: How to remove the Center Pillar Garnish Molding?
A:
You should remove the front and rear door sill plates, the door opening weatherstrip from the door opening where it interferes with molding removal, and the garnish molding from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to install the Liftgate Garnish Molding?
A:
You should install the garnish molding to the liftgate, ensure that the top 4 garnish molding retainers are fully seated first, and install the 2 garnish molding retainers on each side.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the bolt that retains the seat belt anchor to the body?
A:
The recommended torque is 70 N.m (52 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the Body Side Rear Window Garnish Molding (TrailBlazer EXT, Envoy XL)?
A:
You should remove the bolt that retains the seat belt upper anchor to the body, and the garnish molding from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to install the Center Pillar Garnish Molding?
A:
You should seat the 4 garnish molding retaining tabs to the center pillar, and install the door opening weatherstrip and the front and rear door sill plates.
By Bob
GM Specialist
02/11/2022Q: How to install the Front Side Door Water Deflector?
A:
You should install the ORVM wire harness to the door, the speaker, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Side Door Water Deflector?
A:
You should position the water deflector to the door, press the water deflector to the door, ensure that the water deflector forms a proper seal around the surface of the door panel, and install the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Side Door Water Deflector?
A:
You should remove the door trim panel, the speaker, the outside rearview mirror (ORVM) wire harness from the door, and the water deflector from the door by releasing the adhesive backing.
By Bob
GM Specialist
01/11/2022See more FAQs (11)