Part Description: 2007 Buick Rainier Ignition Coil
More Info
Vehicle Fitment
2007 Buick Rainier | All Trims | 8 Cyl 5.3L
FAQ for Ignition Coil Repair
Q: How to install the Ignition Coil?
A:
You should install the ignition coil, the ignition coil retaining bolts, and the air cleaner outlet resonator.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the ignition coil retaining bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the Ignition Coil?
A:
You should remove the air cleaner outlet resonator, the retaining bolts from the ignition coils, and the ignition coils from the engine.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Knock Sensor?
A:
You should install the Knock Sensor and the bolt, connect the knock sensor harness connector and lower the vehicle.
Q: How to remove the Powertrain Control Module (PCM)?
A:
You should remove the PCM harness connectors, from the PCM, the PCM retaining bolts and nuts, and the PCM mounting studs from the intake manifold only if replacing the studs.
Q: How to remove the Ignition Lock Cylinder Case?
A:
You should remove the ignition switch, the turn signal cancel cam, the park lock cable from the lock cylinder housing, 3 TORX(R) screws, and the lock cylinder housing from the steering column.