2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS
$33.13MSRP: $52.63
You Save: $19.50 (38%)
FAQ for Engine Main Bearing Repair
Q: How to install the Crankshaft Rear Oil Seal and Housing?
A:
You should install the crankshaft rear oil seal, remove the J 44227, install the J 44219 guide pins into the block, the crankshaft rear oil seal housing bolts, remove the J 44219 guide pins, and install the remaining 2 crankshaft rear oil seal housing bolts.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Crankshaft Rear Oil Seal and Housing?
A:
You should remove the transmission, the flywheel bolts and remove the flywheel, the crankshaft rear oil seal housing bolts, install 2 bolts into the jackscrew holes to release the cover from the block, and remove the crankshaft and rear oil seal housing, and the oil seal from the crankshaft snout.
Q: How to install the Crankshaft Front Oil Seal?
A:
You should apply the engine oil to the outside diameter of the crankshaft front oil seal, use the J 44218 to install the front oil seal, remove the J 44218, and install the crank balancer shaft.