Part Description: 2007 Buick Rainier Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2007 Buick Rainier | All Trims | 6 Cyl 4.2L
FAQ for Coolant Temperature Sensors Repair
Q: What is the recommended torque for the ECT sensor?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How to install the ECT Sensor?
A:
You should install the ECT sensor, connect the ECT electrical connector, connect the negative battery terminal, and refill the engine coolant.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Engine Coolant Temperature (ECT) Sensor?
A:
You should turn the engine OFF, disconnect the negative battery terminal, drain coolant below the level of the ECT sensor, disconnect the ECT sensor electrical connector, and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Radiator Support Diagonal Brace?
A:
You should remove the bolts that retain the Radiator support diagonal brace, and the radiator support diagonal brace from the vehicle.
Q: How to install the Cooling Fan Relay?
A:
You should install the Cooling Fan Relay and the underhood electrical center cover.
Q: How to remove the Thermostat (4.2L Engine)?
A:
You should remove the necessary coolant from the radiator, the generator, the Thermostat housing bolts, and the thermostat housing from the engine block.