Part Description: 2007 Buick Rainier Radial Seal Air Filter
Vehicle Fitment
2007 Buick Rainier | All Trims | 6 Cyl 4.2L
2007 Buick Rainier | All Trims | 8 Cyl 5.3L
FAQ for Air Filter Repair
Q: How to install the Air Cleaner Element?
A:
You should install the air cleaner element onto the air outlet duct with a twisting and pushing motion, the air cleaner element and air outlet duct into the lower air cleaner housing/washer solvent tank assembly, the air cleaner housing, and the radiator support diagonal brace.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Air Cleaner Element?
A:
You should remove the radiator support diagonal brace if applicable, the air cleaner housing, and the air cleaner element from the air outlet duct with a twisting and pulling motion.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Throttle Body Assembly?
A:
You should install the Throttle Body assembly to the intake manifold with the gasket, the throttle body assembly retaining bolts, the EVAP canister purge line to the throttle body, and the resonator assembly.
Q: How to install the MAP Sensor?
A:
You should install the MAP Sensor and the MAP sensor retainer.
Q: How to remove the Intake Manifold?
A:
You should remove the throttle body, the powertrain control module (PCM) retaining bolts and nuts, the PCM, the engine wire harness bracket bolt, the electrical harness and vacuum lines from the Intake Manifold, the generator, and the intake manifold.