< Back ×
My Vehicle Change Vehicle
2007 Buick Rainier
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2007 Buick Rainier Side Sensor
PartNumber: 10383584
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Side Sensor
Vehicle Fitment- 2007 Buick Rainier | CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier Front Sensor
PartNumber: 10369566
Product Specifications- Notes: Rainier
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.2 x 2.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Front Sensor
Vehicle Fitment- 2007 Buick Rainier | CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier Side Sensor
PartNumber: 10369565Product Specifications- Notes: Envoy/Trailblazer/Rainier; All
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.5 x 3.1 x 3.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Side Sensor
Vehicle Fitment- 2007 Buick Rainier | CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2007 Buick Rainier Front Sensor
PartNumber: 10383585
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Rainier Front Sensor
Vehicle Fitment- 2007 Buick Rainier | CXL | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Air Bag Sensor Repair
Q: How to install the Inflatable Restraint Side Impact Sensor?
A:
You should remove any dirt, grease, or other impurities from the mounting surface, and install the screws which retain the side impact sensor to the door, and the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Vehicle Rollover Sensor?
A:
You should disable the SIR system, fold back the rear carpet to gain access to the sensor, disconnect the electrical connector and remove the nuts securing the rollover sensor to the floor panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Front End Sensor?
A:
You should remove the grille, the headlamp wire harness from the retaining clip, the sensor assembly from the frame, the retaining bolts and protective cover from the sensor, the connector-position assurance (CPA) from the sensor electrical connector, and the sensor from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the screws?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Side Impact Sensor?
A:
You should remove the front door trim panel, the screws that retain the side impact sensor to the door, and the side impact sensor from the door.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint Vehicle Rollover Sensor?
A:
You should install the nuts securing the rollover sensor to the floor panel, and the rear carpet.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint Front End Sensor?
A:
You should remove any dirt, grease, or other impurities from the mounting surface, install the CPA to the sensor electrical connector, the retaining bolts and protective cover to the sensor, the 2 bolts retaining the discriminating sensor assembly to the frame, the headlamp wire harness in the retaining clip and the grille.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint SDM?
A:
You should remove any dirt, grease, etc. from the mounting surface, install the SDM horizontally to the vehicle, the nuts that retain the SDM to the floor panel, the console mounting bracket to the floor panel, and the floor console.
By Bob
GM Specialist
28/10/2022Q: How to remove the Inflatable Restraint Sensing and Diagnostic Module (SDM)?
A:
You should remove the floor console, the console mounting bracket to allow access to the rear carpet, the nuts that retain the SDM to the floor panel, and the SDM from the vehicle.
By Bob
GM Specialist
28/10/2022See more FAQs (4)