Part Description: 2007 Buick Lucerne Dyna Blade Wiper Blade
More Info
Vehicle Fitment
2007 Buick Lucerne | All Trims | All Engines
FAQ for Wiper Blade Repair
Q: How do you clean the Blade Element?
A:
Lift each blade assembly off of the windshield and clean the element with a cloth saturated with full-strength washer solvent. Then rinse the blade assemblies with clear water.
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Wiper Arm Blade?
A:
Raise the wiper arm to the full-up position.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before removing the fuse?
A:
Disconnect the negative battery cable.
Q: What is the service procedure for the Windshield Outside Moisture Sensor?
A:
Disconnect the electrical connector. Unclip the sensor from the windshield.
Q: What should be done before servicing the Washer Pump?
A:
Raise and support the vehicle. Remove the RF tire and wheel assembly. Remove the forward portion of the RF wheelhouse liner. Disconnect the windshield water pump hose from the pump and drain the washer solvent into a suitable clean container.