< Back ×
My Vehicle Change Vehicle
2007 Buick Lucerne
< Back to View All
Windows & Components
- Department
- Prices
OEM (Genuine) 2007 Buick Lucerne Run Channel
PartNumber: 15834177
Product Specifications- Location: Passenger Side
- Other Names: Run Channel
- Item Dimensions: 5.7 x 46.2 x 25.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Run Channel
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$20.99 MSRP:$30.17You Save: $9.18 (31%)
OEM (Genuine) 2007 Buick Lucerne Run Channel
PartNumber: 15834178
Product Specifications- Location: Driver Side
- Other Names: Run Channel
- Item Dimensions: 36.8 x 7.6 x 4.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Run Channel
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Buick Lucerne Channel Asm-Rear Side Door Window Front
PartNumber: 15873932
Product Specifications- Location: Driver Side
- Other Names: Guide Channel
- Item Dimensions: 15.1 x 3.4 x 2.9 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Channel Asm-Rear Side Door Window Front
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Buick Lucerne Channel Asm-Rear Side Door Window Front
PartNumber: 15873931Product Specifications- Location: Passenger Side
- Other Names: Guide Channel
- Item Dimensions: 15.1 x 3.1 x 2.8 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Channel Asm-Rear Side Door Window Front
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
FAQ for Window Channel Repair
Q: What is the removal procedure for the Windshield Frame Header Front Panel?
A:
Disable the SIR system. Disconnect the negative battery cable. Remove all related panels and components. Repair as much of the damaged area as possible. Remove the sealers and anti-corrosion materials. Locate and drill out all the necessary factory welds. Remove the header panel.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the Windshield Frame Header Front Panel?
A:
If the location of the original plug weld holes cannot be determined, space the plug weld holes every 40 mm (1 1/2 in) apart.
By Bob
GM Specialist
01/11/2022