Part Description: 2007 Buick Lucerne Valve Springs
More Info
Vehicle Fitment
2007 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
$1.76MSRP: $2.78
You Save: $1.02 (37%)
FAQ for Valve Spring Repair
Q: What should be noticed when servicing the Valve Stem Oil Seal and Valve Spring?
A:
The color of the replacement seal may not be the same as the original seal. Install the seals in their correct location based on the GM part and package description. Make sure that the seal is fully seated on the valve guide.
By Bob
GM Specialist
02/11/2022
Q: What special tool will I be needing when servicing the Valve Stem Oil Seal and Valve Spring?
A:
You will be needing a spark plug port adapter, valve spring compressor, and valve stem seal installer.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Valve Lifter?
A:
Dip the Valve Lifters in the prelube. Install the valve lifters to the same position the valve lifters were removed. Install the valve lifter guides. Install the valve lifter guide bolts. Install the valve rocker arms and push rods. Install the lower intake manifold.
Q: What is the removal procedure for the Valve Rocker Arm and Push Rod?
A:
Remove the valve Rocker Arms. Remove the valve rocker arm guide plate. Remove the push rod. Clean the push rods, the valve rocker arms, the bolts, and the guide plates in a suitable solution. Clean the valve rocker arm bolts of all thread adhesive.
Q: What special tool will I be needing when servicing the Valve Rocker Arm and Push Rod?