< Back ×
My Vehicle Change Vehicle
2007 Buick Lucerne
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2007 Buick Lucerne Gear Asm, Steering (Remanufacture) <See Guide/Contact Bfo>
PartNumber: 19330570
Product Specifications- Notes: 4.6 Liter, Sport Suspension; Lucerne; 4.6l; Sport Suspension
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 50.3 x 11.0 x 6.0 inches
- Item Weight: 19.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19169238, 19208458
- Part Description: 2007 Buick Lucerne Gear Asm, Steering (Remanufacture) <See Guide/Contact Bfo>
Vehicle Fitment- 2007 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Buick Lucerne Gear Asm, Steering <See Guide/Contact Bfo>
PartNumber: 19330571
Product Specifications- Notes: 4.6 Liter, Firm Ride Suspensio; Lucerne; 4.6l; Firm Ride & Handling Susp
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 51.0 x 11.2 x 6.1 inches
- Item Weight: 23.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19169237, 19208459, 15221009
- Part Description: 2007 Buick Lucerne Gear Asm, Steering <See Guide/Contact Bfo>
Vehicle Fitment- 2007 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
OEM (Genuine) 2007 Buick Lucerne Gear Assembly
PartNumber: 19330572
Product Specifications- Notes: 3.8, 3.9 Liter; Lucerne; 3.8l
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 49.5 x 11.5 x 6.3 inches
- Item Weight: 16.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19208460, 19169234, 19168962, 19133724
- Part Description: 2007 Buick Lucerne Gear Assembly
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
FAQ for Steering Gearbox Repair
Q: What special tool will I need when servicing the Rack and Pinion Inner Tie Rod?
A:
You will need an inner tie rod wrench.
By Bob
GM Specialist
01/11/2022Q: What special tool will I need when servicing the Rack and Pinion Boot?
A:
You will need a keystone to clamp pliers.
By Bob
GM Specialist
01/11/2022Q: What needs to be done before servicing the Rack and Pinion Inner Tie Rod?
A:
Remove the rack and pinion boot.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the inner tie rod?
A:
The recommended torque is 100 N.m (74 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when servicing the Rack and Pinion Inner Tie Rod?
A:
Do not change the steering gear preload adjustment before moving the inner tie rod from the steering gear. Changing the steering gear preload adjustment before moving the inner tie rod could result in damage to the pinion and the steering gear.
By Bob
GM Specialist
01/11/2022Q: What is the disassembly procedure for the Rack and Pinion Boot?
A:
Remove the outer tie rod. Remove the hex jam nut. Remove the tie rod end clamp. Remove the boot clamp. Discard the boot clamp. Remove the rack and pinion boot.
By Bob
GM Specialist
01/11/2022See more FAQs (1)