Part Description: 2007 Buick Lucerne Oil Level Sensor
More Info
Vehicle Fitment
2007 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
$44.53MSRP: $70.70
You Save: $26.17 (38%)
FAQ for Oil Level Sensors Repair
Q: What is the installation procedure for the Engine Oil Level Sensor and/or Switch?
A:
Install the oil level sensor. Connect the engine harness electrical connector. Install the oil pan drain plug. Lower the vehicle. Fill the crankcase with engine oil.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the Engine Oil Level Sensor and/or Switch?
A:
Raise and support the vehicle. Remove the oil pan drain plug and allow the oil to drain. Disconnect the engine harness electrical connector. Remove the oil level sensor.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Camshaft Position Sensor?
A:
Install the Camshaft Position Sensor and bolt. Connect the engine harness electrical connector to the CMP sensor. Install the drive belt. Install the coolant recovery reservoir.
Q: What is the removal procedure for the Engine Oil Pressure Sensor and/or Switch?
A:
Raise and support the vehicle. Disconnect the engine harness electrical connector. Remove the Oil Pressure Sensor.
Q: What is the installation procedure for the Accelerator Pedal Position Sensor?
A:
Install the accelerator pedal. Install the accelerated pedal nuts. Connect the body harness electrical connector to the APP sensor. Install the left I/P sound insulator.