Part Description: 2007 Buick Lucerne Serpentine Belt
More Info
Vehicle Fitment
2007 Buick Lucerne | CXL, CXS, Super | 8 Cyl 4.6 L GAS
$42.95MSRP: $77.78
You Save: $34.83 (45%)
FAQ for Drive Belt Repair
Q: What is the removal procedure for the Drive Belt?
A:
Using a 15 mm box end wrench on the pulley nut, rotate the drive belt tensioner counterclockwise. Remove the drive belt.
By Bob
GM Specialist
29/10/2022
Q: What should be noticed when servicing the Drive Belt?
A:
Do not use belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt.
By Bob
GM Specialist
29/10/2022
Q: What is the installation procedure for the Drive Belt?
A:
Using a 15 mm box end wrench on the pulley nut, rotate the drive belt tensioner clockwise. Install the drive belt. Ensure that the drive belt is properly routed. Ensure that the drive belt tensioner operates properly.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What should be done before servicing the Engine Front Cover?
A:
Drain the engine oil.
Q: What is the recommended torque for the camshaft sprocket bolt?
A:
The recommended torque is 100 N.m (74 lb-ft).
Q: What special tool will I need when servicing the Crankshaft Balancer?
A:
You will need a flywheel holder, crankshaft balancer puller, and torque angle meter.