Part Description: 2007 Buick Lucerne Clutch Switch
More Info
Vehicle Fitment
2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$15.70MSRP: $29.60
You Save: $13.90 (47%)
FAQ for Brake Light Switches Repair
Q: What is the installation procedure for the Stop Lamp Switch?
A:
Install the stop lamp switch into the retainer. Press the switch into the retainer until the switch plunger is fully depressed into the switch barrel. Rotate the switch clockwise until travel has stopped and the switch locks fully into position. Connect the stop lamp/ABS/shift lock switch electrical connector to the stop lamp switch. Adjust the stop lamp switch. Install sound insulator.
By Bob
GM Specialist
29/10/2022
Q: What is the adjustment procedure for the Torque Converter Clutch/Cruise Control Release Switch?
A:
Remove the left closeout/insulator panel. Rotate the switch counterclockwise to release the switch from the retainer. Insert the switch into the retainer until the switch is fully seated against the brake pedal arm. Rotate the switch clockwise to lock the switch into position. Install the left closeout/insulator panel.
By Bob
GM Specialist
29/10/2022
Q: What should be noticed when servicing the Torque Converter Clutch/Cruise Control Release Switch?
A:
Do not depress the brake pedal during the adjustment procedure.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the Stop Lamp Switch?
A:
Remove the left sound insulator. Rotate the stop lamp/ABS/shift lock switch counterclockwise, then pull to remove the switch. Disconnect the electrical connector from the switch.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What should be done before servicing the Body Control Module?
A:
Remove the RH instrument panel insulator. Remove the right windshield pillar trim. Remove the metal bracket.
Q: What is the removal procedure for the Hazard Warning Switch?
A:
Remove the Hazard Warning Switch and bezel. Insert the tool into the hole in the air outlet on each side of the switch to release the tabs. Disconnect the electrical connector.