FAQ for Automatic Transmission Shifter Cable Repair
Q: What is the installation procedure for the Automatic Transmission Range Selector Lever Cable?
A:
Install the range selector cable. Install the retaining clip. Install the left IP closeout panel. Install the transaxle range selector cable. Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin. Insert the retainer. Adjust the range selector cable.
By BobGM Specialist
01/11/2022 Q: How can I find (N) Neutral when placing the transmission manual shaft lever?
A:
Rotate the lever fully counterclockwise to (P) Park, and then clockwise 2 clicks into (N) Neutral.
By BobGM Specialist
01/11/2022 Q: What should be noticed when servicing the Range Selector Lever Cable?
A:
Adjust the shift control cable only while the transaxle and the gear selector are in NEUTRAL.
By BobGM Specialist
01/11/2022 Q: What is the purpose of pressing the locking tabs inward?
A:
Release the transaxle range selector cable from the bracket.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Automatic Transmission Range Selector Lever Cable?
A:
Set the parking brake and chock the wheels. Lift the retainer. Disconnect the transaxle range selector cable terminal. Press the locking tabs inward. Release the transaxle range selector cable. Remove the left closeout/insulator panel. Remove the retaining clip. Remove the range selector cable.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Automatic Transmission Range Selector Lever Cable?
A:
Set the parking brake and chock the wheels.
By BobGM Specialist
01/11/2022 See more FAQs (1)