< Back ×
My Vehicle Change Vehicle
2007 Buick Lucerne
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2007 Buick Lucerne Side Sensor
PartNumber: 25758127
Product Specifications- Item Dimensions: 3.1 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Side Sensor
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)
OEM (Genuine) 2007 Buick Lucerne Side Sensor
PartNumber: 25758125
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 2.9 x 2.3 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2007 Buick Lucerne Side Sensor
Vehicle Fitment- 2007 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
$13.67 MSRP:$20.60You Save: $6.93 (34%)
FAQ for Air Bag Sensor Repair
Q: What should be noticed when servicing the vehicle after collision?
A:
Proper operation of the SIR sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configuration. Not properly repairing the vehicle structure could cause non-deployment in a collision or deployment for conditions less severe than intended.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Module?
A:
Disable the SIR system. Remove the front seat. Remove the seat back cushion finish panel.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Module Wiring Harness?
A:
Disable the SIR system. Remove the front seat. Remove the inflatable restraint side impact module front. Remove the seat's back front panel.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Sensor?
A:
Disable the SIR. Remove the center pillar upper trim panel assembly. Remove the center pillar lower trim panel.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Forward Discriminating Sensor have?
A:
The Forward Discriminating Sensor has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the SDM mounting fasteners?
A:
The recommended torque is 9 N.m (80 lb in).
By Bob
GM Specialist
28/10/2022Q: What should be done before servicing the Instrument Panel Inflatable Restraint Module Indicator?
A:
Remove the overhead console.
By Bob
GM Specialist
28/10/2022Q: What should be done before servicing the Inflatable Restraint Sensing and Diagnostic Module?
A:
Disable the SIR system.
By Bob
GM Specialist
28/10/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Module Wiring Harness?
A:
Disable the SIR system. Remove the front seat. Remove the inflatable restraint side impact module front. Remove the seat's back front panel.
By Bob
GM Specialist
28/10/2022Q: What should be noticed when servicing the SIR?
A:
When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled.
By Bob
GM Specialist
28/10/2022See more FAQs (5)