FAQ for A/C System Seal Kit Repair
Q: What should be noticed when servicing the O-Ring?
A:
DO NOT allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system. And DO NOT reuse O-ring seals.
By BobGM Specialist
28/10/2022 Q: What should be noticed when servicing the Sealing Washer?
A:
After tightening the A/C components, there should be a slight sealing washer gap of approximately 1.2 mm (3/64 in) between the A/C line and the A/C component.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the O-Ring?
A:
Disassemble the A/C refrigerant components. Remove the O-ring seals from the A/C refrigerant component. Inspect the O-ring seals for signs of damage. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.5.Cap or tape the A/C refrigerant components. Discard the O-ring seals.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the Sealing Washer?
A:
Remove the seal washer from the A/C refrigerant component. Inspect the seal washer for signs of damage to help determine the root cause of the failure. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary. Discard the sealing washer.
By BobGM Specialist
28/10/2022