< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
OEM (Genuine) 2006 GMC Yukon Front Motor
PartNumber: 19368521
Product Specifications- Notes: All Models
- Other Names: Front Motor, Wiper Motor
- Item Dimensions: 10.0 x 7.8 x 6.3 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88958406
- Part Description: 2006 GMC Yukon Front Motor
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$200.14 MSRP:$362.26You Save: $162.12 (45%)
Cardone Reman® Remanufactured Wiper Motor for 2006 GMC Yukon
PartNumber: 40-1049Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 2
- Mounting Type: Grommet
- Product Condition: Remanufactured
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2006 GMC Yukon Remanufactured Wiper Motor
Vehicle Fitment- 2006 GMC Yukon | All Trims | All Engines
$96.05
Cardone Reman® Remanufactured Wiper Motor for 2006 GMC Yukon
PartNumber: 40-10016Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt/Grommet
- Product Condition: Remanufactured
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2006 GMC Yukon Remanufactured Wiper Motor
Vehicle Fitment- 2006 GMC Yukon | All Trims | All Engines
$121.57
OEM (Genuine) 2006 GMC Yukon Rear Motor
PartNumber: 15173034
Product Specifications- Notes: All Models
- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 10.3 x 9.0 x 8.8 inches
- Item Weight: 3.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12487646, 88958216
- Part Description: 2006 GMC Yukon Rear Motor
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Windshield Wiper Motors Repair
Q: How to install the wiper motor in the rear?
A:
You need to install the wiper motor and the two screws, connect the wiper motor electrical connector, and install the interior trim panel, the spacer and the nut on the wiper motor drive shaft, and the wiper arm.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper motor in the rear?
A:
You need to remove the wiper arm, the nut, and the spacer from the wiper motor shaft and the interior trim panel, disconnect the wiper motor electrical connector, the two screws, and the wiper motor.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper motor cover?
A:
You need to open the hood, remove the radio antenna, the wiper arms, the air inlet panel, and the connector position assurance (CPA) connector, disconnect the electrical connector from the wiper motor cover and remove the 4 screws and the cover.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper motor?
A:
You need to remove the wiper arms, the air inlet grille panel, the 4 bolts, and the reinforcement panel, disconnect the electrical connector from the wiper motor, remove the 2 bolts from the wiper transmission assembly, the wiper transmission assembly, and the drive link from the wiper motor crank arm, remove the 2 bolts retaining the wiper motor, and the wiper motor from the wiper transmission assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 2 bolts?
A:
The recommended torque is 8 Nm (71 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 4 screws?
A:
The recommended torque is 2.6 Nm (23 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (1)