< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Hinge
PartNumber: 15134524
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Hinge
- Item Dimensions: 5.3 x 4.5 x 1.9 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15767489, 15762178
- Part Description: 2006 GMC Yukon Hinge
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Liftgate Hinge Repair
Q: How to install the lock striker in the end gate (Tahoe/Yukon)?
A:
You need to install the striker and the trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lock striker in the end gate (Tahoe/Yukon)?
A:
You need to remove the lower striker bolt and the striker.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the striker assembly?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the upper cargo hinge in the cargo body side hinge?
A:
You need to inspect and restore as much of the damage as possible to factory specifications, remove all of the related panels and the components, and any excess sealer surrounding the hinge, scribe the location of the hinge on the hinge pillar, locate and drill out all necessary factory welds in the hinge access panel, pry access door out to gain access to the back side of the hinge, locate and drill the center of the hinge welds, separate the hinge from the pillar, and remove the hinge.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the hinge fasteners?
A:
The recommended torque is 25 Nm (20 lb. ft.).
By Bob
GM Specialist
01/11/2022Q: What is the adjustment procedure for the lock striker?
A:
You need to adjust the lock striker accordingly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lock striker in the end gate (Tahoe/Yukon Adjustment)?
A:
You need to remove the rear sill plate trim panel, loosen the striker bolts, move the assembly, forward or backward to obtain the proper close of the liftgate, and ensure that the end gate seals completely with the minimum closing effort.
By Bob
GM Specialist
01/11/2022See more FAQs (2)