< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Hoods
- Department
- Brands
- Prices
OEM (Genuine) 2006 GMC Yukon Latch
PartNumber: 15756432
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 5.7 x 5.8 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15706108
- Part Description: 2006 GMC Yukon Latch
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$56.71 MSRP:$85.57You Save: $28.86 (34%)
Dorman® OE Solutions Hood Latch for 2006 GMC Yukon
PartNumber: 820-201Product Specifications- Notes: Packaging Type: Box; Pkg Quantity: 1
- Attachment Method: Bolt And Screw
- Installation Instructions Included: No
- OE Part Number: 15756432, 15706108
- Package Contents: Hood Latch
- UPC: 885484697560
- Part Description: 2006 GMC Yukon OE Solutions Hood Latch
Vehicle Fitment- 2006 GMC Yukon | All Trims | All Engines
$48.44
FAQ for Hood Latch Repair
Q: What is the removal procedure for the hood hinge?
A:
You need to raise and support the hood, and remove the hinge to the hood bolts and the hinge from the hood.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood latch?
A:
You need to raise the hood, remove the upper radiator support baffle and the bolts from the hood release latch, disconnect the hood ajar indicator switch connector and the hood release cable end from the latch, and remove the hood release latch from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seal in the hood rear?
A:
You need to pull up the rear hood seal and remove it from the cowl pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to install the hood hinge?
A:
You need to install the hinge to the hood bolts, remove the hood support and lower the hood.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the link assembly to the fender bolt?
A:
The recommended torque is 5 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood link?
A:
You need to raise and support the front of the hood, remove the bolts holding the hood link assembly to the hood hinge, the bolts holding the hood link assembly to the fender, and the hood link assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the seal in the hood rear?
A:
You need to align the slot in the rear hood seal with the cowl pinch-weld flange and press it into place.
By Bob
GM Specialist
01/11/2022Q: How to install the hood latch?
A:
You need to connect the hood release cable end to the latch and the hood ajar indicator switch connector, install the hood latch to the radiator support and the hood latch bolts, adjust the hood latch height, raise the hood, adjust the front hood bumpers, and install the upper radiator support baffle.
By Bob
GM Specialist
01/11/2022Q: How to install the hood bumper?
A:
You need to install the side hood bumper by pushing down and sliding the side hood bumper forward, and the front hood bumper by turning the front hood bumper clockwise until the hood closes flush with the fender.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood bumper?
A:
You need to remove the front hood bumper by turning the front hood bumper out counterclockwise, and the side hood bumper by sliding the side hood bumper rearward and pulling up.
By Bob
GM Specialist
01/11/2022See more FAQs (5)