< Back ×
My Vehicle Change Vehicle
2006 GMC Yukon
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2006 GMC Yukon Lower Hose
PartNumber: 22827735
Product Specifications- Notes: All Models; 4.8l, 5.3l, 6.0l
- Other Names: Lower Hose
- Item Dimensions: 5.8 x 4.4 x 14.9 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15037656, 15792826, 15769077, 19130015
- Part Description: 2006 GMC Yukon Lower Hose
Vehicle Fitment- 2006 GMC Yukon | Denali, Denali Hybrid, Hybrid, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$33.96 MSRP:$51.23You Save: $17.27 (34%)
OEM (Genuine) 2006 GMC Yukon Upper Hose
PartNumber: 15179498
Product Specifications- Notes: All Models; 4.8l, 5.3l, 6.0l
- Other Names: Upper Hose
- Item Dimensions: 30.6 x 8.2 x 8.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15033546, 15041305, 15045504, 15076028
- Part Description: 2006 GMC Yukon Upper Hose
Vehicle Fitment- 2006 GMC Yukon | Denali, SL, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$76.04 MSRP:$114.72You Save: $38.68 (34%)
FAQ for Coolant Hose Repair
Q: What should we do if equipped with an 8.1L engine?
A:
You should remove the oil cooler hose bracket bolt, disconnect the quick-connect fittings at the engine, remove the oil cooler hose assembly, discard the gasket, and inspect the fittings, connectors, and cooler hoses.
By Bob
GM Specialist
01/11/2022Q: What should we do if equipped with a 5.3L or 6.0L engine?
A:
You should remove the oil cooler hose bracket bolt, the oil cooler hose adapter bolts, and the oil cooler hose assembly and gasket, discard the gasket and inspect the fittings, connectors, and cooler hoses.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the engine oil cooler pipe/hose quick connect fitting?
A:
You need to disengage the plastic caps, pull the caps back along the pipe, pull on one of the open ends of the retaining ring to rotate the retaining ring, rotate the retaining ring around the quick connector, discard the retaining rings, remove the engine oil cooler line from the quick connector fitting, pull the lines straight out from the connectors, clean all of the components in a suitable solvent, dry them with compressed air, and inspect the fittings, the connectors, the cooler lines, and the cooler.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the oil cooler hose bracket bolt?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed installing the engine oil cooler pipe/hose quick-connect fitting?
A:
You should not reuse the old retaining rings. Replace the old retaining rings with new ones. Do not install the new retaining ring onto the fitting by pushing the retaining ring down over the fitting.
By Bob
GM Specialist
01/11/2022