2006 GMC Yukon Brake Caliper

You should insert a flat-bladed tool between the bushing flange and the mounting bracket, work the tool around the bushing flange and remove the bushing from the mounting bracket, and place a socket over the boot onto the bushing flange and install the bushing to the mounting bracket.

You need to remove the brake caliper, place a thin piece of wood in front of the piston, remove the piston, piston boot, the piston seal, the brake caliper bleed screw cap and the brake caliper bleed screw, inspect the brake caliper bore and the piston seal groove and the brake caliper mounting bracket guide surfaces, remove and replace the brake caliper mounting bracket, clean all the residue from the brake pad guiding surfaces on the brake caliper housing and the brake caliper mounting bracket and all the parts not included in the repair kit, dry all the parts, and blow out all passages in the brake caliper housing and the brake caliper bleeder valve.

You need to raise and support the vehicle, the tire and wheel assembly, the caliper, the disc brake pads from the disc brake caliper mounting bracket and the disc brake pad retainers from the disc brake caliper mounting bracket, inspect the disc brake hardware, and remove the caliper pin boots.

You need to raise and suitably support the vehicle, remove the tire and wheel assembly, the nut and the bolt from the quarter shaft shield, the shield, the 2 brake caliper mounting bolt, the brake caliper, and support, the 2 brake caliper mounting bracket bolts, and the disc brake pads and from the brake caliper mounting bracket.

You need to raise and support the vehicle, remove the tire and wheel assembly, the caliper from the mounting bracket and support the caliper, the disc brake pads from the disc brake caliper bracket, the disc brake pad retainers from the disc brake caliper bracket, the caliper pins from the disc brake caliper mounting bracket and the caliper pin boots from the disc brake caliper mounting bracket, and inspect the disc brake hardware.