< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Monte Carlo
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
OEM (Genuine) 2006 Chevrolet Monte Carlo Rear Cable
PartNumber: 15242626
Product Specifications- Notes: Impala, Monte Carlo; Left
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 11.6 x 11.2 x 3.7 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310911, 10405321
- Part Description: 2006 Chevrolet Monte Carlo Rear Cable
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$30.52 MSRP:$57.58You Save: $27.06 (47%)
Wagner® Parking Brake Cable for 2006 Chevrolet Monte Carlo
PartNumber: BC141967Product Specifications- UPC: 008536571407
- Part Description: 2006 Chevrolet Monte Carlo Parking Brake Cable
Vehicle Fitment- 2006 Chevrolet Monte Carlo | All Trims | All Engines
OEM (Genuine) 2006 Chevrolet Monte Carlo Cable Asm-Parking Brake Front
PartNumber: 15297497Product Specifications- Notes: Impala, Monte Carlo
- Other Names: Front Cable
- Item Dimensions: 11.4 x 10.8 x 3.8 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25919312, 10310909
- Part Description: 2006 Chevrolet Monte Carlo Cable Asm-Parking Brake Front
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2006 Chevrolet Monte Carlo Cable Asm-Parking Brake Rear
PartNumber: 15297496
Product Specifications- Notes: Impala, Monte Carlo; Right
- Other Names: Park Brake Cable, Rear Cable
- Item Dimensions: 30.6 x 9.6 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10310910
- Part Description: 2006 Chevrolet Monte Carlo Cable Asm-Parking Brake Rear
Vehicle Fitment- 2006 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the removal procedure for the park brake cable equalizer?
A:
The procedure is to raise the vehicle, disconnect the left rear park brake cable and adjustment stud assembly, disconnect the front park brake cable and remove the equalizer assembly from the front park brake cable.
By Bob
GM Specialist
02/11/2022Q: How do you adjust the cable connector as outlined?
A:
You can push the cable connector nose forward to remove the slack and push the cable connector lock button down.
By Bob
GM Specialist
02/11/2022Q: How do you replace the park lock cable?
A:
You can disconnect the negative battery cable, remove the console and the knee bolster bracket, place the transaxle shift control lever in the PARK position, turn the ignition key to the RUN position, slip a screwdriver blade into the slot, depress the cable latch, pull the cable from the inhibitor, remove the park/lock cable from the shift control, remove the cable retainer and remove the park/lock cable.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the rear park brake cable?
A:
You can position the park brake cable into the support bracket, install the cable retaining pin and the park brake cable, connect the retainer, connect the rear cable to the front cable, adjust the park brake and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: What should you ensure before installing the park lock cable?
A:
You should ensure the cable lock button is in the UP position and ensure the shift lever is in the PARK position.
By Bob
GM Specialist
02/11/2022Q: How do you replace the rear park brake cable?
A:
You can raise the vehicle, relieve the park brake cable tension at the equalizer, disconnect the front cable, disconnect the retainer, disconnect the park brake cable, remove the cable retaining pin from the support bracket and remove the park brake cable.
By Bob
GM Specialist
02/11/2022Q: What is the first step for adjusting the park lock cable?
A:
The first step is to place the shift lever in the PARK position.
By Bob
GM Specialist
02/11/2022Q: What is the proper way to install the front park brake cable?
A:
You can install the front cable, connect the cable to the parking brake lever, install the cable button and the cable button clip, raise the vehicle, tighten the nut on the equalizer, lower the vehicle, install the parking brake cable, position the carpeting properly, install the lower center pillar trim panel on the left side, the left side carpet retainers and the left side instrument panel insulator and adjust the parking brake.
By Bob
GM Specialist
02/11/2022Q: How do you install the park brake cable equalizer?
A:
You can install the equalizer assembly, connect the front brake cable to the right rear cable, connect the left rear brake cable and adjustment stud assembly to the equalizer assembly, adjust the park brake system and lower the vehicle.
By Bob
GM Specialist
02/11/2022Q: How do you replace the front park brake cable?
A:
You can remove the left-side instrument panel insulator, the left-side carpet retainers, and the lower center pillar trim panel on the left side, fold back the carpeting, remove the parking brake cable, raise the vehicle, remove the brake cable at the equalizer, lower the vehicle, remove the cable button end and remove the front cable.
By Bob
GM Specialist
02/11/2022See more FAQs (5)