2006 Chevrolet Monte Carlo Intake Manifold

You can remove the throttle body and the fuel injectors, remove the brake booster vacuum hose, remove the positive crankcase ventilation (PCV) clean air tube, remove the PCV foul air tube, remove the evaporative emission (EVAP) purge solenoid tube, disconnect the electrical connectors, remove the MAP sensor, remove the EVAP purge solenoid valve and bracket, remove the intake manifold bolts, remove the intake manifold and remove and discard the intake manifold gaskets.

You can install the new intake manifold gaskets and the intake manifold, apply a band of threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the intake manifold bolts, install the intake manifold bolts, the EVAP purge solenoid bracket and solenoid, install the MAP sensor, connect the electrical connectors, position and install the EVAP purge solenoid tube to the solenoid, install the PCV foul air tube, install the PCV clean air tube, install the brake booster vacuum hose, install the fuel injectors and install the throttle body.