2006 Chevrolet Impala | 50th Anniversary Edition, Eco, LS, LT, LTZ, Police, SS | 4 Cyl 2.4 L ELECTRIC/GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2006 Chevrolet Impala Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2006 Chevrolet Impala | All Trims | 8 Cyl 5.3L
2006 Chevrolet Impala | All Trims | 6 Cyl 3.5L
2006 Chevrolet Impala | All Trims | 6 Cyl 3.9L
Show More
FAQ for Coolant Temperature Sensors Repair
Q: What is the removal procedure for the Engine Coolant Temperature Sensor?
A:
Drain the cooling system below the level of the engine coolant temperature (ECT) sensor, disconnect the ECT sensor electrical connector, and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the ECT sensor?
A:
The recommended torque is 20 N.m (15 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be done before servicing the Coolant Pump Manifold?
A:
Drain the cooling system.
Q: What is the recommended torque for the shock tower studs?
A:
The recommended torque is 3.3 N.m (29-inch lbs.).
Q: What should be done before servicing the Cooling Fan Motor?