Notes: 3.5 & 3.9 Liter; 5.3 Liter; Impala, Monte Carlo
Other Names: Air Filter, Element, Filter Element
Item Dimensions: 9.9 x 9.2 x 2.2 inches
Item Weight: 1.00 Pounds
Fitment Type: Direct Replacement
Part Description: 2006 Chevrolet Impala Filter Element
More Info
Vehicle Fitment
2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2006 Chevrolet Impala Panel Air Filter
Vehicle Fitment
2006 Chevrolet Impala | All Trims | 8 Cyl 5.3L
2006 Chevrolet Impala | All Trims | 6 Cyl 3.5L
2006 Chevrolet Impala | All Trims | 6 Cyl 3.9L
Show More
FAQ for Air Filter Repair
Q: What should be done before making warranty repairs?
A:
If an aftermarket reusable air filter is used, technicians should inspect the MAF sensor element and the air induction hose for contamination of oil before making warranty repairs.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the Air Cleaner Element?
A:
Install a NEW air filter element and the air cleaner housing cover, engage the spring clamps on top of the air cleaner housing, and install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Air Cleaner Element?
A:
Remove the air cleaner outlet duct, release the spring clamps on top of the air cleaner housing, and remove the air cleaner housing cover and the air filter element.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the installation procedure for the Manifold Absolute Pressure (Map) Sensor?
A:
Lubricate the MAP Sensor grommet with clean engine oil, if required. Install the MAP sensor grommet, if required. Install the MAP sensor. Connect the MAP sensor electrical connector. Install the engine sight shield.
Q: What should be noticed when servicing the Intake Manifold?
A:
The Intake Manifold, throttle body, fuel rail, and injectors may be removed as an assembly. If not servicing the individual components, remove the manifold as a complete assembly.
Q: What should be done before inserting fingers into the throttle bore?
A:
Turn OFF the ignition before inserting your fingers into the throttle bore. Unexpected movement of the throttle blade could cause personal injury.