< Back ×
My Vehicle Change Vehicle
2006 Chevrolet Impala
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2006 Chevrolet Impala Front Sensor
PartNumber: 15250331
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Impala Front Sensor
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$238.31 MSRP:$359.52You Save: $121.21 (34%)
OEM (Genuine) 2006 Chevrolet Impala Side Sensor
PartNumber: 10346367
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 2.2 x 0.9 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2006 Chevrolet Impala Side Sensor
Vehicle Fitment- 2006 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
$178.10 MSRP:$280.11You Save: $102.01 (37%)
FAQ for Air Bag Sensor Repair
Q: What is the installation procedure for the Inflatable Restraint Side Impact Module Wiring Harness?
A:
Install the new inflator module wiring harness to the seat, install the retaining clips that secure the wiring harness to the seat, install the side impact inflator module to the seat, and enable the sir system.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Inflatable Restraint Side Impact Module Wiring Harness?
A:
Disable the SIR system, remove the side impact inflator module from the seat, remove the retaining clips that secure the inflator module wiring harness to the seat, and remove the wiring harness.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Front End Sensor?
A:
Disable the supplemental inflatable restraint system, and remove the upper air baffle and deflector.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Sensor?
A:
Disable the SIR system, and remove the front door panel.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Indicator?
A:
Remove the instrument panel accessory trim panel.
By Bob
GM Specialist
28/10/2022Q: Where is the LF/driver-side impact module connector?
A:
The LF/driver-side impact module connector is located under the front of the driver seat.
By Bob
GM Specialist
28/10/2022Q: What should be done before disabling and enabling the SIR?
A:
Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
By Bob
GM Specialist
28/10/2022Q: What should be done before removing the key from the ignition switch?
A:
Turn the steering wheel so that the vehicle wheels are pointing straight ahead, and turn the ignition switch to the OFF position.
By Bob
GM Specialist
28/10/2022Q: Is it necessary to disable the SIR components when performing service on SIR wiring?
A:
The SIR system has been divided into Disabling and Enabling Zones. When performing service on or near SIR components or the SIR wiring, it may be necessary to disable the SIR components in that zone. It may be necessary to disable more than one zone depending on the location of other SIR components and the area being serviced.
By Bob
GM Specialist
28/10/2022Q: What should you do if the AIR BAG warning indicator does not operate as described?
A:
Perform the Diagnostic System Check-Vehicle.
By Bob
GM Specialist
28/10/2022See more FAQs (10)